It is 15 3/4″ around the outside curve and 11″ tip to tip. The Butt is Dogwood and is 2 5/8″ in diameter, it is held in by 4 steel pins that are under the leather, there are 10 Brass tacks that keep it in place. The finial is also Dogwood and is threaded 1/2-8. There were worm holes in the Dogwood so I poured Pewter into them, they can be seen as light spots in the wood, they can be easily aged so as not to be seen if wanted. The tip is two pieces of cow horn it is pinned to the horn. The leather was glued and sewn down the length of the top. $230 + 10 for shipping, contact ccrosby004@columbus.rr.com
