Products – Contemporary Longrifle Association

SOLD – Vegetable Tanned Calfskin Shotbag

Gary Brown — Mon, 30 Mar 2026 17:46:51 +0000

Here is a very nice, aged calfskin shotbag that I have stained a deep, rich mahogany. Measuring across the middle of the bag, it is 10 1/2″ deep X 11 1/2″ wide. It has a full gusset with a leather flange between all seams for durability. I have added a French cross to the leather lined flap. The rest of the bag is lined with a heavily stained ticking. The bag is completely hand stitched with brown linen thread. It has two solid brass buckles for even adjustability on the shoulder. I have treated the bag with Fiebings Aussie Leather Conditioner which is a product I have used for many years.
Shipping is free within the USA.
If interested please text or email:
Gary Brown
angusrosie@gmail.com
812-340-9947
Thanks for looking!

12 Gauge Colonial Fowler/Musket with Bayonet

Stewart, Cory J. — Mon, 30 Mar 2026 17:17:23 +0000

This musket and accoutrement set was built by Cory Joe Stewart of NC.
It is a Jim Chamber’s Flintlocks New England Fowler Musket in 12 Gauge. The carving pattern on the musket was inspired by an original musket featured in George C. Neuman’s Battle Weapons of the American Revolution. Here are the particulars

Total length: 62 inches
Trigger pull: 14 inches
Barrel is a Rice Octagon to Round smooth bore 12 Gauge
There is a White Lightening Touch Hole Liner installed
The Lock is a Chamber’s Round Faced English Lock
My fish scale says it weights a little over 8 pounds
Along with this musket I had Nathan Allen make a plug bayonet. The bayonet was inspired by one in George C. Neuman’s Battle Weapons of the American Revolution. The bayonet has a single cutting edge so it is not a dagger. I made the scabbard also based on an original and Shayna Matthews wove the Liberty or Death Strap.

This will make a bold statement at your next morning militia roll call.
There is a repair just under the side plate in the wood that is visible, but repaired and is not a structural issue.
I am asking $2900.00 and that is for everything. I do not want to spit the set up. Price includes shipping, I ship in wooden boxes. Paypal, checks or money orders all work fine.

Let me know if you have any questions or would like to see other pictures.

12

Stewart, Cory J. — Mon, 30 Mar 2026 17:11:27 +0000

Bag Horn and Knife Set

Stewart, Cory J. — Mon, 30 Mar 2026 16:48:41 +0000

The bag and horn set was made by Cory Joe Stewart of NC. It was inspired by an original set. The bag is handstitched from barktanned deer hide and has a deer hide flap. The strap is a mix of barktanned hide and ticking material.
The particulars are:

The bag is 7 inches wide by 8 inches deep
The plain horn is 15 inches long including the stopper
The strap is over 50 inches and is adjustable by way of a steel buckle

The knife was made by Nathan Allen and is 12 inches overall with a 7 inch blade.
I am asking $350.00 that includes shipping. Paypal, checks, money orders all work

DON BROUGHTON FORGED BLADE SCOTTISH DIRK

Haage, Ed — Sat, 28 Mar 2026 18:36:25 +0000

THIS SCOTTISH DIRK WAS MADE BY DECEASED MASTER SMITH AND CONTEMPORARY LONGRIFLE ASSOCIATION MEMBER, DON BROUGHTON AND WE PURCHASED IT DIRECTLY FROM HIM IN 1996 AT THE ATLANTA BLADE SHOW. AFTER MANY YEARS WE BECAME FRIENDS AND WE PURCHASED SEVERAL PIECES FROM HIM BEFORE HIS PASSING. THE SHEATH IS VERY UNIQUE AND ONE OF A KIND AS IT WAS MADE FOR US AS A SPECIAL FAVOR FROM OUR FRIEND, KAREN SHOOK, WHO NORMALLY ONLY MADE SHEATHS FOR DANIEL WINKLER. BLADE IS 13 INCHES AND OVERALL LENGTH IS 181/4 INCHES. HANDLE IS WALNUT WITH BRASS PINS AND BRASS CAP. KNIFE HAS DON’S TOUCH MARK. IT IS IN MINT CONDITION. IT IS A REMARKABLE PIECE. BUYER PAYS SHIPPING

Rifleman’s Knife

Nathan Allen — Sat, 28 Mar 2026 01:38:47 +0000

Hand forged knife by Nathan Allen. Blade forged from antique buggy spring steel properly tempered to hold a keen edge. Wrought iron gaurd and whitetail antler crown handle. Overall length 15 5/8″, blade length 10 3/4″, width 1 5/8″. Price includes shipping.
Nathan Allen
317 727-0999
Ind.nate@yahoo.com

Patch Knife

Nathan Allen — Sat, 28 Mar 2026 01:34:13 +0000

Hand forged knife by Nathan Allen. Blade forged from an antique file properly tempered to hold a keen edge. Whitetail antler crown handle with poured pewter bolster. Overall length 8 3/4″, blade length 4 7/8″, width 1″. Price includes shipping.
Nathan Allen
317 727-0999
Ind.nate@yahoo.com

Two Books on Confederate Weapons – SPF

Fundukian, John E. — Thu, 26 Mar 2026 17:41:47 +0000

One hardcover and one softcover. Media Mail included; shipped in a box. PayPal or send a check. Thanks. John
Sold pending payment 3-26-26.

Colonial Williamsburg Utensil Set

Emig, Bradley E. — Wed, 25 Mar 2026 20:09:22 +0000

This beautiful vintage set of 18th Century style cooking utensils was hand forged by Colonial Williamsburg blacksmith Bob Rowe. Bob worked in the Deane Forge at Colonial Williamsburg in the 1970’s and the 1980’s. This set was assembled in the mid 1980’s with each piece being signed and dated, bearing its date of production as well as the Williamsburg stamp “WMSBG” and Bobs personal stamp “BR”. Each of these pieces retain a wonderful natural patina, and they stand as a great example of 18th Century period workmanship. Quite a unique and rare opportunity to own a set of ironware from that period in Colonial Williamsburgs history.

Hand Forged Pipe Tomahawk by Simeon England

Willyard, Kyle K. — Tue, 24 Mar 2026 15:57:12 +0000

Early style tomahawk, hand forged from a section of old gun barrel. High carbon bit welded into cutting edge. The 7 1/2″ blade features fille-work and aged finish. The long, 21 1/2″ curly maple handle is fully drilled, and stained to a dark finish. England’s tomahawks are in high demand and usually have a several year wait. A rare opportunity for an immediate purchase.